Environmental Test Chamber

Product Description

Environmental Test Chambers by ETAC In order to be able to deliver the optimal solution to suit the upgrading requirement of the market, we focus on the development of specialist equipment for specific industries and develop a wide range of products from standard to custom-made.

Logo-NEO

Low GWP HIFLEX NEO E
Environmental Test Chamber

The revolutionary HIFLEX NEO series will change the way that reliability tests are performed. Low GWB Refrigerant R-448A is adopted as the best environmental-friendly technology.

  • Original “Smart controller” equipped to all models as standard contributes and flexible operation
    As chamber control application software is installed in the “smart controller”, flexible operation, data preservation, etc. is enabled through direct control by using external terminals.
  • Power-saving/low noise/high performance
    The latest DC inverter rotary compressor is equipped. Power consumption is reduced by a maximum of 58% (our comparison).
  • Minimization of humidification water
    Unique updated function supplying humidification water realizes 1000 hours of continuous operation without humidification water supply subject to +85℃/85%RH operation.
  • Space-saving
    Space-saving is realized by a state-of-art mechanism. User-friendly design by adopting cable port at both sides.
  • Temperature./humidity controllable range (FX type)

Environmental Test Chamber

HiflexNeo Logo

Environmental Test Chamber

Compact and multi-stacking type HIFLEX NEO “S series” with excellent performance equivalent to HIFLEX NEO.

The basic performance of HIFLEX NEO S is equivalent to HFILEX NEO, which is treated as a “standard chamber”.
In addition to advanced space-saving design and multi-stacking performance for simultaneous plural tests, the basic policy of HIFLEX NEO is penetrated.

  • Contribution to development time reduction by space-saving
    Installation space comparison between SXN403 and 3 units of the existing model. Space-saving contributes minimization of the development period because of not only effective use of installation space but also simultaneous different 3 kinds of tests under different conditions.
  • High performance
    • Adoption of powerful sirocco fan
      Adoption of sirocco fan which is more powerful wind volume and pressure than propeller fan which is used test at the laboratory. Sirocco fan contributes high uniformity performance while specimen inside.

neo-s-fig-02

    • Wide Temperature/humidity rangeEven the compact size, it realizes equivalent temperature range to NEO series. It also enables maximum humidity range 98%RH operation. Furthermore, as option, enlargement of non-frost range is positive.

WintechNeo Logo

WINTECH Neo series is model with various advanced function and performance, such as energy-saving, space-saving, minimization of recovery time, excellent uniformity, specimen temperature control etc. The full line-up covers reliability test for electrical parts, semi-conductor products, power device used in automotive etc.

Environmental Test Chamber

This is model with various advanced function and performance, such as energy-saving, space-saving, minimization of recovery time, excellent uniformity, specimen temperature control etc. The full line-up covers reliability test for electrical parts, semi-conductor products, power device used in automotive etc.

  • Stable temperature recovery performance by cold and hot air damper switching systemETAC’s unique hot and cold air switching system by dampers consists of an independent high temperature room, a low temperature room and a test room (where specimen is placed). Hot and cold air are prepared in high temperature room and low temperature room respectively before either hot air or cold air flows in test room alternately, exposing the specimen in the test room to sudden temperature change. Because the test room does not move and only the ambient temperature around specimen changes rapidly. No other extra stress such as vibration is added to the specimen.
    In addition, because the current conduction cables can be easily connected to the specimen, this design is optimum for test which requires accurate measurement such as joint reliability evaluation.
  • +300°C specification+300°C specification is recently launched for reliability test of power device from automotive parts to industrial equipment with high voltage and high current.
    For the launch, basic components were renewed due to renew heat-resistant.
    Both high performance and excellent safety are adopted.

Keyword: Environmental Test Chamber

Inquiry Form

Fill in this form to send your questions related to this Dynatech product.