Shore Portable Durometer

shore

bareiss

HP Model – hardness testers manual, mechanical

jam

The scales graduation is 0-100 Shore, divided in 100 units.

The entire chassis of HP is made of aluminum which provides light weight and durability. Bareiss has built the evergreen of hardness testers in a nearly unchanged design since 1954.

 

Hp model is available in Shore A, A0, B, 0, C, D, D0, 00, 000, Bareiss Variant C (Asker C), Densimeter variant. HP model also comply with the following standard : DIN ISO 7619, DIN EN ISO 868, NF T 51-174, ASTM D 2240, BS 903 Part. A 26

HPE II Model – Hardness tester manual, digital

bareiss_057

constant contact pressure and measuring
time acc. to standards – optical and acoustical
signal, serial interface and PC-cable

The chassis of HPE II is made of aluminum which provides light weight and durability.

Bareiss HPE II Series battery lasts about 2000 working hours. The measured data storage allows to store
300 results. After the measurement is done, the result will be saved automatically. The display will show “M” for memory. The saved data can be transfered with a data output RS 232 to a PC.

HPE II model is available in Shore A, B, 0, C, D, D0, 00, 000, Bareiss Variant C (Asker C), Densimeter variant. HPE II model also comply with the following standard : DIN ISO 7619, DIN EN ISO 868, NF T 51-174, ASTM D 2240, BS 903 Part. A 26

 

HPE II L, L/c – Hardness tester manual, digital

Setir

Hardness test on steering wheels. By help of the quick-center device the test stamp HPE II L is placed in the centre of the prescribed measuring area of the steering wheel. The load is applied by a weight which is fixed at the measuring frame. After the expiration of measuring time the measured value is read in the displays of the HPE II L and data logger and stored.

To learn more about this instruments you may go to bareiss or you can write an email for sales rep to contact you